HN-R1A Grinding & Antirust Emulsification Cutting fliud
HN-R1A Grinding & Antirust Emulsification Cutting fliud
 |
 |
 |
Characteristic:
The product has excellent cooling, corrosion resistance, lubricty, also has good cleaning properties. the emulsified oil that is emulsified with water, it is widely used in machining lathe, planer grinder, more widely used in the production of bearing metal processing.
Function:
This product is widely used as a process oil processing technology on the machinery industry and used in Machining lathe, pianer, grinder process, as a cooling, anti-rust, lubricating purposes.
Quality index:
| Item | Index | Test method | |
|---|---|---|---|
| Appearance | Brown oily substance | Eyeballing | |
| pH value （5%） | 7.5~9.5 | pH test paper | |
|
Salt allowable amount（15-35℃，4h ）0.5mlNaCl Saturated solution |
no | SH0365 Appendix Ⅲ | |
| Corrosin test 55±2℃ | 45#steel | 24 | SH0365 Appendix Ⅳ |
| copper sheet | 24 | ||
| Antirust property cast iron sheet 35±2℃ | Monollithic | 24 | SH0365AppendixⅠ |
| Laminations | 4 | ||
| Emulsion stability（5%） 15-35℃，24h | soap≤ | 0.5 | SH0365 AppendixⅠ |
| Oil | no | ||
| Defoaming property 10min ≤ | 2 | SH0365 Appendix Ⅴ | |
Directions for use:
Grinding is generally used at a concentration of 5% emulsion preparation,i.e.5% of the HN-R1C copper wire drawing Cutting fluid added 95% of emulsified oil in water emulsion was stirred into the white can be uaed. Cutting concentration is generally 8~10%
Packing and storage:
200L、20L iron drum. Stored at room temperature, to prevent water and other debris mixed.
-
HN-69-1 Emulsification Cutting fluid -
HN-M9 Machining Center Emulsification Cutting fliud -
HN-R1 Grinding & Antirust Emulsification Cutting fliud -
HN-R1A Grinding & Antirust Emulsification Cutting fliud -
HN-R1B Line Cutting Emulsification fliud
-
HN-R1C Copper Wire Drawing fluid
